Loading ...
Loading ...
Loading ...
100719 - 8500W ELECTRIC START INVERTER GENERATOR
CONTROLS AND FEATURES
13
Control Panel
1. EZ Start Dial – Used to start, stop and choke the generator.
2. Intelligauge – See Intelligauge section.
3. Circuit Breakers (Push Reset) – Protects the generator
against electrical overloads.
4. Ground Terminal – Consult an electrician for local grounding
regulations.
5. Ignition Switch – Used to START the generator.
RECEPTACLES
A
z
12V DC, 8A (Regulated Automotive)
May be used to supply electrical power for
operation of 12 Volt DC, 8 Amp electrical loads.
B
Y
120/240V AC, 30A Locking (NEMA L14-30R)
May be used to supply electrical power for
operation of 120/240 Volt AC, 30 Amp, single
phase, 60 Hz electrical loads.
C
C
(4×) 120V AC, 20A GFCI (NEMA 5-20R)
May be used to supply electrical power for
operation of 120 Volt AC, 20 Amp, single phase,
60 Hz electrical loads.
WARNING
When charging a device, do not place on the exhaust side of
the generator. Extreme heat caused by exhaust can damage
the device and cause a potential fire hazard. Prolonged
exposure to engine exhaust can cause serious injury or death.
4
B
A
C
5
2
1
3
EZ Start Dial
1. Choke
2. Engine Run
3. Fuel Off
4. Engine Stop
1
2
4
3
Loading ...
Loading ...
Loading ...