Loading ...
Loading ...
Loading ...
OPERATION
Register your product
4 | CK 150-1 / 200-2 Trend www.stiebel-eltron-usa.com
3. Register your product
You must register this product within 90 days of
purchase on our web site in order to activate the
standard warranty or to be eligible for any extended
warranty. Go to our web site at
www.stiebel-eltron-usa.com and click on register
your product.
Before beginning the registration process, we suggest that
you gather the necessary information which will be as
follows:
Model (Example: CK 200-2 Trend):
Serial number (listed after “Nr.”):
Place of Purchase:
Purchase Date:
First & Last Name:
Email address:
Physical Address:
Phone Number:
If you have any questions concerning the registration process
or warranty options, please contact Stiebel Eltron USA direct-
ly at (800)-582-8423.
4. Heater description
The unit is a wall mounted electric direct heater. It is suitable for
use in areas such as workspaces, kitchens, bathrooms and alike.
The heater heats the indoor air and keeps it at the selected
temperature. The heater includes a fan that draws in indoor air
through an air intake at the back of the heater. Inside the heater,
the intake air is routed over a PTC heating element. Heated air
is expelled through the air discharge at the front of the heater.
When the selected room temperature has been reached, the heat-
er maintains it through peroidic heating.
The heater is equipped with a high limit safety cut-out that switch-
es the heater off in case it overheats. Once the cause of the fault
has been eliminated, the heater restarts within a few minutes
(cooling period).
The heater is equipped with further overheating protection in the
form of a fuse that shuts down the heater irreversibly in the event
of severe overheating.
D0000056451
1
2
3
1 Temperature selector
2 Air discharge
3 On/off rocker switch
5. Settings
On the left side of the unit, there is an on/off rocker switch that
controls the operation. In the on position, the unit may turn on
if the thermostat calls for heat. In the off position, the unit does
not function.
The required room temperature can be infinitely adjusted by
means of the temperature selector.
To shut down the heater, disconnect the circuit breaker for the
heater.
Frost protection
To use the heater only to protect from frost, turn the temperature
selector counterclockwise as far as it will go. In this position, the
heater heats automatically if the room temperature falls below the
frost protection temperature (See 14.3, “Data table”, pg. 9).
6. Cleaning, care and maintenance
DANGER: Electrocution
Before cleaning, make sure the power has been turned
off at the circuit breaker panel and that the heating
element of the heater is cool.
Clean the exterior of the heater when cold with ordinary cleaning
products. Avoid abrasive or corrosive cleaning products.
If a pale brownish discoloration appears on the heater casing,
wipe this off as soon as possible with a damp cloth.
!
MATERIAL LOSSES:
Never spray cleaning spray into the air slot.
Loading ...
Loading ...
Loading ...