Loading ...
Before You Begin
DO NOT INSTALL DISHWASHER
UNTIL YOU HAVE READ ALL
INSTRUCTIONS.
Electrical Shock Hazard
Disconnect electrical power atthe
fuse box or circuit breaker box
before installing dishwasher.
Fanure to do so can result In
death or electrical shock.
Please read this book completely before you begin. These instructions will help you anticipate water,
electrical, and drain connections, and will help you select the best location for your dishwasher. Installation
tips are located on page 3.
NOTE: Observe all local codes and ordinances for electrical and plumbing connections when
installing your new dishwasher. All electrical and plumbing work should be performed by qualified
persons.
Plan the Installation
Locate the dishwasher where there is easy access to existing water, drain, and electrical lines. Be sure the
water inlet valve will be protected from freezing temperatures. If the valve freezes, flooding may occur.
The best location for your dishwasher is on either side of the kitchen sink. This position should provide easy
access to existing plumbing and will be convenient for loading items into the dishwasher once your dishwasher
is installed.
All kits mentioned in this book are available from your Sears department store or Sears Service Center.
Tools You Will Need
•eve Wire,,ri00er Rarin ,oo
or Knife (for copper
tubing)
Measuring
Tape _ Pipe Joint compound
(for iron pipe !,_
Electric Drill _ plumbing)
3h6", 1/4",%B", and 3/e"
Socket or Nut Driver "_
Keyhole Saw or
1/2",1 V2", and 2"
Hole Cutters
Slotted and Phillips
Screwdrivers
(magnetic tip
preferred)
Teflon®Tape
(for iron pipe plumbing)
2 Pipe Wrenches _;j_
(for iron pipe
plumbing)
Tube Cutter
(for copper tubing)
2 Adjustable
Wrenches
(for copper tubing)
Pliers ._
Items You Will Need
Drain Hose Clamp -1 V£ Inner Diameter (ID) (included)
90 ° Elbow - 3/8"National Pipe Thread "Street L" or compatible right angle fittings (not included)
Strain Relief Connector (not included)
Wire Nuts (2) (not included)
Printed in USA
Loading ...
Loading ...
Loading ...