Loading ...
Loading ...
Loading ...
23
Permanently Change Cycle Buttons
To permanently change the cycle buttons in a profile you can export the revised
profile to a USB drive and then import the profile on the blender� Or you can edit
the profile using the Blend Wizard (my�blendtec�com), and then export the profile
to the blender�
Temporarily Disable Cycle Buttons
To temporarily disable a number or cycle button when working in a selected
profile, complete the following steps:
1� Press and hold the cancel/exit button for 3 seconds�
2� Use the scroll button and then select Blend Cycles from the menu by
touching the select button�
3� Use the select button to choose the Standard Blend Cycles�
4� Use the scroll button to find Disable Button, then press select�
5� Enter the number button you want to disable, then press select�
Note: After you have disabled a number button, you will notice that an
asterisk appears after the profile name when you return to operation mode.
The disabled button will also not appear on control panel.
Loading a new profile on your blender will reset the profiles and enable all
the cycle buttons again.
Permanently Disable Cycle Buttons
To permanently change the cycle buttons in a profile you can export the revised
profile to a USB drive, and then import the profile on the blender� Or you can
disable any number using the Blend Wizard (my�blendtec�com), and then export
the revised profile to the blender�
4.2.9 The Blend Wizard
In addition to using the profiles and cycles preprogrammed on your blender, you
can use the Blend Wizard to create custom profiles and cycles� For instructions
on using the Blend Wizard to easily develop custom profiles and cycles, visit
my�blendtec�com�
Importing Custom Profiles and Cycles
After you’ve created your custom profiles and cycles using Blend Wizard and
downloaded them to a USB flash drive, use the follow steps to import the file to
your blender�
1� Use a Phillips screwdriver to remove the USB cover at the top of the right side of
the blender�
2� Plug the USB flash drive into the blender’s USB port�
Note: If the blender is in manual or automatic operation mode, the USB
flash drive menu will automatically load on the screen. If the blender is in
programming mode, go to the main menu and select USB Flash Drive.
3� Select Import Profile from the USB flash drive menu�
ENGLISH
Loading ...
Loading ...
Loading ...