Loading ...
Loading ...
Loading ...
온수
잠금
온수
잠금
16
How To Use
How To Dispense Room Water
How to Set Hot Water Lock Function
This function prevents children from randomly operating the product and
getting burnt. If this function is selected, the [Hot/Lock] button won't work.
❶
If you press the [Hot/Lock] button for three seconds in the Waiting
status, the Hot Water Lock will be selected.
▶
If you press the [Hot/Lock] button in the Hot Water Lock status, “Loc_” will be
displayed and the Voice Guide will say “Child lock on.”
▶
If you press the [Hot/Lock] button for three seconds in the Hot Water Lock
status, “Un_Loc_” will be displayed and the Hot Water Lock will be released.
HOT
LOCK
ROOM
COLD
❶
Press the [Room/Cold] button to select room water.
▶
The Voice Guide will say “Room Temperature Water.”
❷
In order to use the fixed quantity outflow,
▶
Select the desired quantity from among the buttons of [Half Cup], [One Cup] and
[Non-Stop].
▶
Press the [Outflow] button once. The room water will be dispensed.
▶
When the selected quantity of water is completely dispensed, the water dispensing will end.
▶
If you press the [Outflow] button or the selected fixed quantity button again while the product is dispensing
the fixed quantity of water, the water dispensing will be ended.
❸
If you want to operate the Manual Outflow,
▶
Press the [Outflow] button. The room water will be dispensed.
▶
If you keep pressing the [Outflow] button for two seconds or longer,
the product will be changed into the Manual Outflow status.
▶
The Voice Guide will say “Water dispensing during pressing.”
▶
If you stop pressing the [Outflow] button during the Manual Outflow, the water dispensing will end.
❹
While the room water is being dispensed, the Green Mood Light on the Faucet will be
turned ON. (When the Mood function is turned OFF, the light will not be turned ON.)
HOT
HOLD
SELECT MODE SELECT
LOCK(3SEC) ENERGY SAVE/
SETTING(3SEC)
HALF
CUP
ONE
CUP
NON-
STOP
HOT
TEMP.
TIME/
STERILIZE(3SEC)
FILTER
RESET(3SEC)
ROOM
COLD
HOT
LOCK
ROOM
COLD
To use hot water after installation
❶
Press the [Hot/Lock] water button and press the [Outflow] button.
▶
“Start water input installation check” voice will follow
▶
Water outflow will stop when product check is done
▶
“Product installed successfully” voice will follow
❷
Hot water can be used after product installation is completed.
HOT
LOCK
ROOM
COLD
Loading ...
Loading ...
Loading ...