Loading ...
Loading ...
Loading ...
OPERATION
OvenControl,Clockand Timer
Your new control has a series of tones
that will sound at different times.
These tones may sound while you set
the control for an oven function, or at
the end of the oven function. It will also
alert you that there may be a problem
with the functions, Below are the types
of tones and a brief description of
each.
TONES WHILE SE'I-rlNG THE
CONTROL-- When you press a touch
pad you witi hear a beep This beep
will let you know you have placed
enough pressure on the pad to activate
it (The arrow pads do not beep)
END OF TIMED CYCLE TONE -- At
the end of a timed cooking function,
you will hear 3 short beeps followed by
1 beep every 6 seconds This 6 second
beep will continue to sound until the
CLEAR/OFF pad is pressed or you
may select the special feature to cancel
this 6 second beep from sounding at
the end of future cycles
TO CANCEL THE 6 SECOND BEEP
Press and hold the BAKE and
BROIL pads, at the same time for
3 seconds, until the display shows
"SF."
2. Press the KITCHEN TIMER pad
The display will show "CON
BEEP" (continuous beep)
3. Press the KITCHEN TIMER pad
again The display will show
"BEEP" (beep canceled)
4. Press the START pad to cancel the
6 second beep and leave the
special feature mode
If you would like to return the 6 second
beep, repeat steps above until the
display shows your choice and press
the START pad.
ATTENTION TONE -- This tone will
sound if you make an error or an
oversight is made while setting an
oven function.
Examples would be:
a. Setting a clean cycle and the oven
door is not properly closed.
b. Setting function and not pressing the
START pad.
c. Pressing an additional function pad
without first setting a temperature or
time
Any of these can be quickly identified
by watching the display
PREHEAT TONE -- When you set an
oven temperature, the oven
automatically starts to heat When the
temperature inside the oven reaches the
temperature you have set, a tone will
sound to let you know the oven is ready
for baking
If the cgntrol beeps while the display is
showing "F" and a number or letter
such as "F-4" or "R" there may be a
problem with the control or oven.
Simply press the CLEAR/OFF pad and
wait about an hour° Try setting the
function again, If the code repeats,
write down the flashing code and call
for service, Tell the technician what
code was flashing.
9
Loading ...
Loading ...
Loading ...