Loading ...
Loading ...
Loading ...
8 9
SELECT EVENT-BASED
™
AIR CLEANING
SETTING
Press
to select:
ON-24/7: This option will provide the maximum amount
of air cleaning available. The air cleaner will be active
for 24 hours a day seven days a week.
AUTO: Air cleaning will not occur for the sole purpose
of air cleaning, but will occur during fan operation for
heating and cooling.
OPERATION & PROGRAMMING
CIRC-30/HR: The air cleaner will run a minimum of
30 minutes every hour. The air cleaner will monitor
the amount of time your heating and cooling system
runs; if 30 minutes is not reached the air cleaner will
automatically turn on. This will maximize the amount of
air cleaning while minimizing energy consumption.
EVENT-3HR: When selected, the air cleaner will run
continuously and then return to the most recent mode
of AUTO, CIRC-30/HR, or ON-24/7. Use this option
when the air needs cleaning; an example would be
while vacuuming.
ALLERGY-24HR: When seasonal allergies spike and
outside air quality is at its worst, choose this option.
Your air cleaner will run continuously for 24 hours and
then return to the most recent mode of AUTO,
CIRC-30/HR, or ON-24/7.
RESET SERVICE REMINDER MESSAGES
Press and hold
and together for three
seconds to reset a service reminder message.
SET TIME AND DAY
2. Press
or to adjust the hour.
3. Press
, the minutes flash. Press or
to adjust the minutes.
4. Press
, the day flashes. Press or
to adjust day.
5. Press
to end. “DONE” will display.
The thermostat will return to normal mode if no key is
pressed within 3 seconds.
OPERATION & PROGRAMMING
1. Press to enter time setting mode. The hour
is flashing.
UNDERSTANDING PROGRAM SCHEDULES
The daily schedule is split into four sections:
WAKE: 6am-8am – Temperature you would prefer to
wake up to, until you leave for the day.
LEAVE: 8am-5pm – Temperature when you are away
from the house during the day.
RETURN: 5pm-10pm – Temperature you would prefer to
return to, until bedtime.
SLEEP: 10pm-6am – Temperature you would prefer
during the night.
The times shown are the defaults. The start time and
temperature of each section can be changed to fit your
schedule (see page 11).
Note: If configured to do so, the home automation
system can send periodic time updates to the thermostat.
If the thermostat is configured to be used with an
Aprilaire account the thermostat’s time and date will be
updated periodically, and will update automatically for
daylight savings.
Loading ...
Loading ...
Loading ...