Loading ...
Loading ...
Loading ...
Before youcMi forsemice...
PossibleCauses WbatToDo
Wasb speed changes A Normalwash speed _as chosen o It is normal tbr the NomTalwash speed to change from
fast to moderate during fl_e wash cycle=
Washer won't operate Washer is unplugged = Make sure cord is plugged securely into a wortdng oudel.
*Watersupply is turned off * Tm'n bofl_ hot and coM faucets fully on,.
Controls are not set properly * Check controls.
Lid is open , Close lid.
Circuit breaker/fuse is * Check tmuse circuit breaking/fuses,, Replace fitses or
tripped/blown reset breaker:, Washer' should have sepmate outlet_
EIectrouics need to be reset * Unplug washez; wait 2 minutes, plug back in, and press
START,
START was not pressed • Press START,
PossibleCauses WhatToDo
Clothes too wet Incorrect spin cyde o Make sure die spin cycle selected matches dm load you
: selected are washing Some fabrics _dll feel wetter when rinsed
, with cold water,
Coloredspots Incorrect use of fabric o Check fabric softener package for insmlcdons and follow
softener directions for using dispenser
o Preueat stain and rewash,,
Dye transfer * Sort whites or lighdy colored items from dark colors
6rayed or yellowed Not enough detergent o Use more detergent (especially x_dr larger loads).,
clothes
Hard water * Use a water conditioner like Calgon brand or install
a water softener
Water is not hot enough * Make sure water heater is delivering water at
120°E-140°F (48°C-60°C),
Washer is overloaded * Select load size to match cloflms load,
Detergent is not * Add detergent as wash basket fills widl water before
dissolving you load clodaes.
Dye transfer • Sort clodaes by color'. If fabric label states wash separatelg
unstable dyes may be indicated,
Lint or residue on CAothes are ,air or llne dried *
clothes
Incorrect sorting *
Washing too long
Detergent not dissolving *
14
If you do not dry your clodms wida a clodms dryer, your
clothes may retain more lint,
Sepm-ate lint producers from lint collectors,
Wash small loads for a shorter time daan larger loads,
Add detergent as "washbasket fills widt water; before you
toad clodms
Overloading
* Try a liquid detergent,
" Use warmer x_ater temperature
, Load clodaes no higher daan dae top row of holes in the
washer rob,,
• Make sure load size selector matches clodms load size
Incorrect use of fabric softener * Check fabric sof[ener package for insmJctions and follow
directions for using dispenser.
Loading ...
Loading ...
Loading ...