Loading ...
Loading ...
Loading ...
E
I
About washer features.
The Agitator Cap or Fabric Softener Dispenser
The agitator cap fits into the top of the
agitator: If it accidentally comes off,
simply put it back on.
The fabric softener dispenser au tomatically
releases liquid fabric softener at the
proper time during tile cycle.
Denot stopthe washer duringthefirst spin.
Thiswill causethedispensertoempty
too soon,
To use, follow these steps:
['_] Make sure dispenser is securely
attached to agitator
Use only liquid fabric softener,
Pour into dispenser; using amount
recommended on package,,
Never pour fabric softener directly on
clothes° It may stain them°
Add water to dispenser' unti! it
leaches the mmximum fill line
Donot pouranything into the
agitator ff the agitator cap or
dispenser is rernovecL
i
Separate for cleaning
Cleaning the Fabric Softener Dispenser
p]Remove the dispenser fl'om the top
of the agitator',
2--)Separate d_e dispenser cup from the
cover by grasping the top and
pushing down on the inside of the
cup with your fingers Dispenser cup
will pop free from the cover:
['j] To clean tile dispenser; soak both
the dispenser cup and tile dispenser
cover in the following solution:
[] t USgallon(3.8liters)warm water
M 1/4cup(60m!)heavydutyliquid
detergent
R 1cup(240m!)bleach
['_] If necessar); loosen build-up with a
clean, soft cloth after soaking, Do not
use a stiff brush; you may roughen
the surface of the dispenser,
['_]Rinse and reassemble dispensel: Place
dispenser' back, on the agitator,,
t0
Loading ...
Loading ...
Loading ...