Loading ...
Loading ...
Loading ...
7
ENGLISH
Installing the Guard (Fig. B, C)
WARNING: Never remove the guard.
Damage or personal injury couldresult.
WARNING: NEVER OPERATE
APPLIANCE WITHOUT GUARD FIRMLY IN PLACE.
The guard must always be properly attached on the
appliance to protect theuser.
1. Remove the guard screw
19
.
2. Slide the guard
9
fully onto the trimmer head
18
.
Make sure the tabs
20
on the guard engage the ribs on
the trimmer head.
3. Continue to slide the guard on until it “snaps”into place.
The locking tab should snap into the housing slot.
4. Using a crosshead screwdriver, insert the guard screw
and tighten securely.
5. Once the guard is installed, remove the covering from
the line cut-off blade, located on the edge of the guard.
Fig.B
19
18
Fig.C
20
9
Attaching the Auxiliary Handle (Fig. D)
1. Place the auxiliary handle
4
onto the top of the upper
trimmer pole
6
as shown in Figure D.
2. Slide the bracket
30
of the auxiliary handle onto the
bottom of the handle.
3. Thread the handle bolts
31
through the handle and
into the bracket from above.
4. Tighten the handle bolts. Ensure the handle is securely
attached by closing the handle clamp
21
.
5. To adjust the position of the auxiliary handle, open the
handle clamp and slide the handle up and down the
pole until it is in the desired location. Close the clamp to
lock the handle in place.
Fig.D
21
4
6
30
31
Releasing the Cutting Line (Fig. A)
In transit, the cutting line is taped to the spool housing
10
.
• Remove the tape holding the cutting line to the
spoolhousing.
OPERATION
WARNING: To reduce the risk of
serious personal injury, turn unit off and
remove the battery pack before making any
adjustments or removing/installing attachments
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of
serious personal injury, turn unit off and
remove the battery pack before making any
adjustments or removing/installing attachments
or accessories, when replacing line, or prior to
cleaning. An accidental start-up can causeinjury.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
Loading ...
Loading ...
Loading ...