Loading ...
Loading ...
Loading ...
ENGLISH
8
or accessories, when replacing line, or prior to
cleaning. An accidental start-up can causeinjury.
WARNING: Always use proper eye
protection that conforms to ANSI Z87.1 (CAN/CSA
Z94.3) while operating this appliance.
WARNING: Remove the battery before
making any assembly, adjustments, or changing
accessories. Such preventive safety measures reduce
the risk of starting the trimmer accidentally.
CAUTION: Before you begin trimming, only
use the appropriate type of cutting line.
CAUTION: Inspect area to be trimmed and
remove any wire, cord, or string-like objects which
could become entangled in the rotating line or spool.
Be particularly careful to avoid any wire which might
be bent outwardly into the path of the appliance, such
as barbs at the base of a chain link fence.
Installing and Removing the Battery Pack
(Fig. E)
NOTE: For best results, make sure your battery pack is
fullycharged.
To install the battery pack
12
into the tool handle, align the
battery pack with the rails inside the tool’s handle and slide
it into the handle until the battery pack is firmly seated in
the tool and ensure that it does notdisengage.
To remove the battery pack from the tool, press the release
button
13
and firmly pull the battery pack out of the tool
handle. Insert it into the charger as described in the charger
section of thismanual.
Fig.E
12
13
Proper Hand Position (Fig. F)
WARNING: To reduce the risk of serious
personal injury, ALWAYS use proper hand position
as shown.
WARNING: To reduce the risk of serious
personal injury, ALWAYS hold securely in anticipation of
a suddenreaction.
Proper hand position requires one hand on the main
handle
14
and one hand on the auxiliary handle
4
.
Fig.F
4
14
Switching Trimmer On and Off (Fig. A)
WARNING: Never attempt to lock the
trigger in the onposition.
To turn the appliance on, squeeze the lock-off button
2
and then the trigger
1
. Once the unit is running, you may
release the lock-off button. To turn the appliance off, release
the trigger.
Trimming (Fig. G, H)
With the trimmer on, angle it and swing side to side as
shown in FigureG.
Maintain a cutting angle of 5° to 10°. Do not exceed 10°. Cut
with the tip of the line.
Maintain a minimum distance of 24" (610 mm) between the
guard and your feet as shown in FigureH.
Fig.G
Loading ...
Loading ...
Loading ...