Loading ...
Loading ...
Loading ...
-14-
OPERATION
CONTROLS
OFF : Turns air conditioner off.
FAN ONLY : Fan operation without cooling or heating.
LOW COOL : Cooling with low fan speed operation.
HIGH COOL : Cooling with high fan speed operation.
LOW HEAT : Heating with low fan speed operation.
HIGH HEAT : Heating with high fan speed operation.
Turn the Temperature Knob to the desired setting.
The central position is a normal setting for average conditions.
You can change this setting, if necessary, in accordance with your
temperature preference.
The thermostat automatically controls cooling or heating, but the fan
runs continuously whenever the air conditioner is in operation.
If the room is too warm, turn the thermostat control clockwise.
If the room is too cool, turn the thermostat control counterclockwise.
The compressor will turn on and off to keep the room at the set temperature.
In the heating operation, the electric heater will turn on and off to keep the room at the set temperature.
When the air conditioner has been operated in the
cooling or heating mode and is turned off or set to
the fan position, wait at least 3 minutes before
resetting to the cooling operation again.
CAUTION
A slight burning odor may come from the
unit when first switching to HEAT after the
cooling season is over. This odor, caused
by fine dust particles on the heater, will
disappear quickly. This is normal operation.
Loading ...
Loading ...
Loading ...