Loading ...
Loading ...
Loading ...
• Install a suitable conduit box (not furnished). An appropriately sized, UL conduit
connector must be used to correctly attach the conduit to the junction box.
Important: Local Codes may vary; installation electrical connections and
grounding must comply with all applicable local codes.
If local codes permit grounding through the electrical supply neutral, connect both
the white neutral wire and the green ground wire from the oven to the white
neutral electrical supply wire.
• Check with a qualified electrical installer if you are not sure the oven is properly
grounded.
• Single Oven - When a 4-wire, single phase 240 volt, 60 Hz., AC only
electrical supply is available, a 25-amp maximum circuit protection is required.
• Double Oven - When a 4-wire, single phase 240 volt, 60 Hz., AC only
electrical supply is available, a 40-amp maximum circuit protection is required.
Important: This appliance shall be installed only by authorized persons and in
accordance with the manufacturer’s installation instructions, local gas fitting
regulations, municipal building codes, electrical wiring regulations, local water
supply regulations.
Step 1 - Unpack The Oven
Style
Single Oven
Double Oven
Voltage And Frequency
240V, 60 Hz
240V, 60 Hz
Amps
20.0A
35.4A
Circuit Required
25 Amp Circuit
40 Amp Circuit
EXCESSIVE WEIGHT HAZARD
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
WARNING
07
Australia:
1(844) 538-7890
www.gaslandchef.com
www.gaslandchef.com.au
United States:
Loading ...
Loading ...
Loading ...