Loading ...
Loading ...
Witheachwashcycle.
Compartment
For pro gramm es with pre-wash only.
(Follow the user instr uctions!)
Electric indicator on controlpanel (if provided).
Check the rinse aid level
Load the baskets
Select a programme
Close the door , turn on the water tap and press the Start/Pause button. The machine will start working
after about 10 seconds.
Runni ng the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the deter gent dispenser
Warning: wait a few m inutes (about 15 minutes) before unloading the dishwasher to avoid handling
the dishes and utens ils while they are still hot and more susceptible to break.
They will alsodry better.Unload the appliance, startingfrom the lower b asket.
Changing theprogramme
Add forgotten dishes in the
dishwasher.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
Press the Programme button until the selected programme lights up.
( See the section entitled Operationg instruction )“”
When the working cycle has finishe d, the buzzer of the
dishwasher will soun d 8 times, then stop.
Turn off the appliance using the ON/OFF button.
If the appliance is switched
off during a wash cycle.
Op en t he door car ef ully.
Hotst eamm ay esc ape
when thedoorisopened!
If the appliance is switched off during a wash cycle, when switched
on agai n, please re-select th e washing cycle and opera te the dishwasher
according to the original Power-on state ).
Switch on the appliance Press the On/Off button to switch on the appliance, Open the door.
1.Open the do o r a little to st o p the dishwas her.
2.After the spray arm s stop working, you can open the door complete ly.
3.Add the forgotten dishes.
4.Close the door, the dishwasher will star t running again after 10 seconds.
For detailedoperating methodread the corresponding content onthe instruction man ual.
1.A running cycle can o nly be modified if it has been running for a short time. O therwise the detergent
m ay have alre ady be en released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Press the Start/Reset button for more than 3 seconds to cancel the running programme.
3. Select a new programme .
4. Restart the dishwasher.
Loading ...
Loading ...
Loading ...