Loading ...
Loading ...
Loading ...
17
Thedishes were not
loaded correctly.
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive programme.
See" Wash Cycle Table ".
Use more detergent, or change your detergent.
Rearrange the items so that the spray can rotate freely.
Clean and/or fit the filter combination correctly.
Clean the spray arm jets. See "Cleaning the Spray
Arms".
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishes are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
In short program the washing temperature is lower.
This also lowers cleaning performance. Choose
a program with a long washing time.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The programme was
not powerful enough.
Not enough detergent
was dispensed.
Items are blocking
the path of sprayarms.
The filter combination
in the base of wash
cabinet is not clean or
is not correctly fitted.
This may cause
the spray armjets
to get blocked.
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
Wrong program
has been selected
Use of cutlery with
alow-qualitycoating
Unsatis
-factory
washing
result
Unsatis
-factory
drying
result
Tap is not opened, or water intake is restricted,or water pressure
is too low.
Some element of dish washer leaks .
Longer inlet time.
Over flow
When some m alfu nctions come on, the appliance will display error codes to warn you:
If overflow occurs, turn of f the main wate r supply before calling a service.
If ther e is water i n the base pan because of an overfill or small lea k,
the water should be removed before restarting the dishwasher .
Longer draining time.
The soak light
flicker fleetly.
The rapid ligh t
flicker fleetly.
The nor mal light
flicker fleetly.
The installation position of the drain pipe is too high.
Loading ...