Loading ...
Loading ...
Loading ...
6
For best performance of the dishwasher, follow these loading guidelines. Features and
appearance of baskets and cutlery baskets may vary from your model.
Attention before or after Loading the Dishwasher Baskets
Scrape off any large amounts of leftover food. Soften remnants of burnt foodinpans.
It is not necessary to rinse the dishes under running water.
Place objects in the dishwasher in following way:
1.Items such as cups, glasses, pots/pans, etc. are faced downwards.
2.Curved items, or ones with recesses, should be loaded aslant so that water can run off.
3.All utensils are stacked securely and can not tip over.
4.All utensils are placed in the way that the spray arms can rotate freely during washing.
Very small items should not be washed in the dishwasher as they could easily fall out of the baskets.
Removing the Dishes
To prevent water dripping from the upper basket into the lower back, we recommend that you
empty the lower basket first and then the upper basket.
Loading the Upper Basket
The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee
and tea cup and saucers, as well as plates, small bowls and shallow pans (as long as they are not too dirty).
Position the dishes and cookware so that they do not get moved by the spray of water.
1
Cups
2
Glasses
Saucers
3
4
Dessert dishes
POSITION THE DISHES AND COOKWARE SO THAT THEY DO NOT GET
MOVED BY THE SPRAY OF WATER. ALWAYS PLACE GLASSES, CUPS &
BOWLS UPSIDE DOWN.
THE UPPER RACK IS FOR MORE DELICATE AND LIGHTER DISHWARE
SUCH AS GLASSES, COFFEE & TEA CUPS, SAUCERS, PLATES, BOWLS,
AND SHALLOW PANS (PROVIDED THESE ARE NOT TOO DIRTY).
NOTE:
YOUR DISHWASHER COMES WITH AN ADJUSTABLE TOP RACK (BASKET)
PICTURED AT RIGHT. ITS HEIGHT CAN BE ADJUSTED BY LIFTING THE
HANDLE IN A DOWNWARD OR UPWARD DIRECTION. (PLS SEE THE
FIGURES ON THE RIGHT: POSITION 1 & POSITONG 2.)
NOTICE:
ENSURE THE METAL ROD IS LOCATED IN ITS CORRECT POSITION.
POSITION 1
POSITION 2
*** ***: THE UPPER RACK HAS SIDE FLAPS (PICTURED AT LEFT
ABOVE BASKET). THERE ARE 4 (2 ON EACH SIDE). THESE CAN BE
ADJUSTED INTO 2 POSITIONS = POSITION 1 (HIGH) AND POSITION 2 (LOW).
NOTE
TO MOVE THE FLAPS BETWEEN THESE POSITIONS, LOCATE THE LARGE HINGES
CLIP EACH FLAP TO THE UPPER RACK. THERE ARE TWO OF THESE AT
EITHER END OF EACH FLAP. GENTLY PULL BOTH CLIPS OFF THE WIRE RACK
AND MOVE THE FLAP TO THE DESIRED POSITION. BE CAREFUL IF YOU HAVE
LONG FINGERNAILS!
Loading ...
Loading ...
Loading ...