Loading ...
Loading ...
Loading ...
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
It may take a white when your TV starts.
Plug & Play Feature
The first time you turn on your new TV, choose your basic settings for language, input source and channels, and
time of day using the plug and play feature. The TV will store these settings in memory. Storing the channels in
memory will allow you to scan the stored channels rather than have to enter their digits each time you want to
change channels.
When the TV is initially powered on, basic settings proceed automatically:
1 Press the POWER button on the remote control.
The message Menu Language, Store Demo, Channels and Time will be
set. is automatically displayed.
Press the ENTER button to enter the language.
Press the A or _' button to select language, then press the ENTER button.
The message Select "Home Use" when installing this TV in your home. is
automatically displayed.
_- The Screen Saver is activated if there is no remote control key input for
longer than 1 minute while Plug & Play is running.
The Screen Saver is activated if there is no operating signal for longer than
15 minutes.
Press the 4 or _ button to select Store Demo or Home Use, then press the
ENTER button.
_-- We recommend setting the TV to Home mode for the best picture in your
home environment.
_,_ Store Demo mode is only intended for use in retail environments.
_-- If the unit is accidentally set to Store Demo mode and you want to return
to Standard (Home Use) mode, press and hold the Volume button, then
press the MENU button on the TV for 5 seconds.
Press the & or _' button to memorize the channels of the selected connection,
then press the ENTER button.
_,_ Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals.
_,_ In Cable mode, you can select the correct analog signal source among
STD, HRC, and IRC by pressing the A, T, 4, _ button, then press the
ENTER button. If you have Digital cabte, select the signal source for both
Analog and Digital. Contact your local cable company to identify the type of
cable system that exists in your particular area.
Continued...
Loading ...
Loading ...
Loading ...