Loading ...
Loading ...
Loading ...
Page 4 of 4
211103
TROUBLESHOOTING
CARE AND MAINTENANCE
Caution: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or
removing the fuse from the fuse box.
This LED light fixture is made from quality materials that will last many years with minimum care. You may want to
periodically clean the fixture with a soft cloth. To maintain the best appearance of the fixture, do not use cleaners with
chemicals, solvents or harsh abrasives. Do not use liquid cleaner on the LEDs, LED drive, or wiring inside the light
fixture.
If unable to fix any of the above issues, please consult a certified electrician.
Spare Parts List:
Assembly Kit
6422MM (1 SET)
The following parts are available for re-order if damaged or missing. Call our toll free at 1-800-887-6326
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails
due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this
lighting fixture with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PATRIOT
LIGHTING agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT
LIGHTING product or part free of charge, within the stated warranty period, when returned by the original purchaser
with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does
not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to
persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary
from state to state.
R
R
R
R
Adaptor
X1
7197PA
Drywall Screw
X6
AA BB
Mounting Clip
X4
CC
Link Cord
X1
DD
POSSIBLE CAUSE CORRECTIVE ACTION
The power is off.
Check to ensure the power
supply is on.
Check to ensure the circuit
breaker is in the on position.
Check to ensure proper wire
connections are made. Contact a
qualified electrician.
The circuit breaker is off.
There is a bad connection.
The IR Sensor is interfered.
The light is affected when
adjusting the CCT Button
Switch.
Too many fixtures connected. Linkable up to three fixtures at most.
Lock the IR Sensor first then adjust
the CCT Button Switch.
PROBLEM
The fixture doesn't light up.
The light flashes.
The wires are crossed or the power
wire is grounding out.
Check to ensure proper wire
connections are made. Contact a
qualified electrician.
The fuse blows or circuit
breaker trips when the light
is turned on.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CST