Loading ...
Loading ...
Page 3 of 4
ASSEMBLY INSTRUCTIONS (continued)
5. Plug the connector of the adaptor (DD) into light
fixture (A) and plug the adaptor (DD) into outlet.
The connector of the adaptor (DD) must be
plugged into the end with sensor.
6.
Linking multiple fixtures:
The fixture can be connected together in a series using the link cord (CC)
included with this product. It will also work with SKU# 346-7201
(Sold Separately), but only one can be connected.
1. Two fixtures can be connected by inserting the link cord (CC) into the
connecting hole at the end of the fixtures. When using the link
cord (CC), the maximum distance between two light fixtures is 18",
and the connector of the link cord ("TOP" mark) must be consistent
with the light-emitting surface.
2. Provide power to the fixtures only after all linking connections have
been made.
3. Only the parent light needs to be plugged into an outlet.
4. Attach the light fixture (A) to the mounting clips (AA) by
sliding one side of the fixture into the mounting clips (AA)
first, then press and push the other side of the fixture into
the mounting clips (AA).
211103
FUNCTION AND OPERATION
4
AA
A
1x
2x
Dimming
IR Sensor Switch
CCT (Correlated Color Temperature)
Button Switch
CCT (Correlated Color Temperature)
Button Switch
CCT (Correlated Color Temperature)
Button Switch
The Brightness Locked Or Unlocked
To select the desired color temperature,
cycle through 2700K-4000K-5000K by
pressing the CCT button. When the color
temperature of the light needs to be adjusted, the brightness
of the light must be locked first to prevent interference with
the IR sensor when pressing the CCT button switch.
Selected The Color Temperature
ON-OFF
CCT Button Switch
IR Sensor
Switch
TURNING LIGHTS ON, OFF
Wave hand under sensor once to
turn light on or off.
DIMMING LIGHTS
Hold hand under sensor to adjust brightness.
NOTE: Dimming ranges from 100% ~10%
brightness.
Outlet
5
DD
A
IR Sensor Switch
Child Light
SKU# 346-7200 Parent Light
SKU#346-7201 (Sold Separately)
DD
CC
6
For all the below operations, the distance between the hand and the sensor shall be within 4".
All linked Child Light (s) can be controlled by the IR sensor switch and CCT (Correlated Color Temperature)
button switch on the parent light.
The brightness of the light can be
locked or unlocked by quickly waving
to the sensor twice. If it is locked or unlocked
successfully, it will flash once respectively.
IR Sensor Switch
IR Sensor Switch
Loading ...