Loading ...
Loading ...
Loading ...
_0st0_erS_ice _A4'Y"/,4G
240EdwardsStreet,SE
Cleveland.Tennessee3731t
Tel:423-472-3333
Fax:423-478-67;0
INSTALL DRAIN HOSE
Secure drain hose to siphon break using the hose clamp provided in the parts package. The
siphon break can be turned right or left to meet the end of the drain hose. Place the goose-
neck into the standpipe (or position the gooseneck as if it were in the standpipe). Insert the
clamp over the hose and direct the straight end of the hose toward the siphon break outlet
with a very gradual bend. Push the drain hose over the siphon break outlet and if necessary
twist the hose to relieve any stress on the hose between the siphon break outlet and the
standpipe after the hose is inserted into the standpipe.
NOTE: It is very important when connecting the drain hose that it is properly installed to
minimize the chance of the hose becoming kinked when the washer is moved into position.
If it is necessary to extend the drain hose, attach one end of the extension hose to the siphon
break, and in the other end insert an accessory coupler, similar to the one shown below.
Push the drain hose (hose with short gooseneck) over the coupler until the extension hose and
drain hose join together in approximately the middle of the coupler. When the coupler is
properly used, hose clamps are not required.
€OUFUnl
DUIN HOSE
Ma_rAG Aamtrai _'| _.JENN-,_Ii:! _'_lagic Chef
Loading ...
Loading ...
Loading ...