Loading ...
Loading ...
Loading ...
Removing and Replacing
the Microwave uven
If you need to removeyour Microwave Hood
Combinationfor any reason,follow these simple
steps:
To remove:
1. Unplug microwaveoven or disconnectpower.
2. Remove filtersand
ventgdlle.
• IffiltersA are
installed,pushin at
_ the tab and slide
filterto theoutside
edge to remove.
• Remove the two
screwsB from
the top of the
microwaveoven
cabinet (thescrews located closestto the front
comers). Do not remove the screws located
towards the center of the cabinet.
• Remove the vent grilleC. Set the screwsand
gdlleaside. (If gdllecannotbe removed, see
Step 4.)
3. After removingall
oven contents,
includingthe
turntableand
support, tape the
door in the closed
position.Then
removethe two
belts D securing
the microwaveoven
to the upper
cabinet.
4. Hold microwave
hood combination in
place with one hand.
Pull hook E to release
microwave hood from
mounting plate. If grille
cannot be removed
(seeStep 2), insert a
thin looped wire or
similar tool through an
opening in grille to
pull hook.
5. Grasp the microwave
oven cabinet. Rotate
the microwaveoven
downward. (Be careful
that door does not
swingopen.)
6. Lift Offthe support
tabs F at the bottom
of the mounting plate.
Set the microwave
oven aside on a
protectedsurface.
Loading ...
Loading ...
Loading ...