Kenmore 25344483700 Elite refrigerator

User Manual - Page 16

For 25344483700.

PDF File Manual, 34 pages, Download pdf file

Loading ...
Loading ...
Loading ...
16
Using The Alarm Reset Button
You can disable or activate the alarm system by pressing and holding the Reset button
for three seconds. Use it, for example, to turn off audible tones and/or flashing indicator
lights.
Thealarmsystemdoesnotautomaticallyresetifyoudisconnectandreconnectyour
refrigerator'spowercord.It canonlybereactivatedbypressingtheAlarmResetbutton,
Once you disable the alarm system, you must again press and held the Alarm Reset
button for three more seconds to reset (activate) the alarm system. The On indicator
light remains off while the freezer and refrigerator compartments cool toward the current
cooling settings. When temperature settings are reached, the On light displays green to
indicate an active alarm system.
Checking the Air Filter Status
Your refrigerator's fresh food air filter needs to be replaced from time to time. You can
monitor the need for replacement by pressing and holding the Air Filter On/Off button for
three seconds.
On O ALARM AIR
FILTER
High Temp 0 0 Order Filter
Power Failure 0 0 Change Filter
*Hold 3 see.
To check the air filter status:
1 Press the Air Filter On/Off button. This activates a test cycle,
and one of the three filter status lights displays, indicating one
of the following:
Filter OK Air filter does not need changing.
Order Filter Air filter is about 80 percent used. Please order new one.
Change Filter Air filter is 100 percent used. Please change now.
AirFilterOn/OffButton
IndicatorLights
2 Press the Air Filter On/Off button to turn off the status light.
Forinstructionsonreplacingtheairfilter,seepage25,
COLD FREEZER
®
_ Cooling System
On/Off Button
TurningThe Cooling System On And Off
You can disable the cooling system in your refrigerator by pressing the
system's On/Off button located on the left side of the temperature control
panel.
To ensure that you do not accidentally turn off the cooling system, the button
does not work unless you press and hold it for three seconds.
Once you disable the cooling system, all refrigeration to the freezer and
refrigerator compartments stops. To turn the cooling system back on, you must
again press and hold the On/Off button for three more seconds.
TheOn/Offbuttononlycontrolsyourrefrigerator'scoolingsystem.Powertolightsandother
electricalcomponentscontinuesunlessyouunplugthepowercord.
Loading ...
Loading ...
Loading ...