Loading ...
Loading ...
Loading ...
13
Allowing Cooling Time Before Use
To ensure reliable food storage, allow your refrigerator and freezer to operate with the
doors closed for 8 to 12 hours before placing food inside. During this cooling period, you
do not need to adjust the controls, which are preset at the factory.
Setting Cooling Temperatures
Your refrigerator comes with a state-of-the-art electronic digital control system. The
system's control panel is located at the top of the refrigerator compartment.
COLD FREEZER REFRIGERATOR COLD
FILTER
High Temp O O Order Filler
COLDE_ MODE COLDER Power Failur_ Q ® C6_g_Filt_t
The two digital
displays on the left
half of the control
panel indicate the
current
temperatures of your
freezer and
refrigerator
compartments.
COLD
®
@
COLDER
To adjust the temperature to a higher or lower setting, press the Cold or Colder arrow
button closest to the display. The first time you press the button the display shows the
last setting you entered. Each press of the button after that increments the setting by
one degree.
The display shows your new setting momentarily, then changes back to the current
temperature. (Refer to page 14 for more about temperature settings.)
Theadvancedelectroniccontrolsysteminyourrefrigeratorincludesadditionaldisplay
modesthatserviceprofessionalscanusetorapidlydiagnoseperformanceissues.
COLD
COLDER
FREEZER
REFRIGERATOR COLD
MODE COLDER
I Press to alternate between
Fahrenheit and Centigrade
Choosing Fahrenheit or Centigrade
Depending on which temperature standard you prefer to
use, you can set your control panel to display in Fahrenheit
or centigrade. To change between these standards, press
the C°/F ° Mode button.
Loading ...
Loading ...
Loading ...