Loading ...
Loading ...
Loading ...
TROUBLESHOOTINGCHART
PROBLEM
Lossof power
)oor cut- uneven
Excessive
_,ibration
Starter rope hard
Io pull
Grass catcher
motfilling (if so
_uipped)
-lardto push
3AUSE
• Rearoflawnmowerhousing
orcuttingbladedragging
inheavygrass.
• Cuttingtoomuchgrass.
• Dirtyairfilter.
• Buildupofgrass,leaves,
andtrashundermower.
• Toomuchoilinengine.
• Walkingspeedtoofast.
• Worn,bentorlooseblade.
• Wheel heights uneven.
• Low enginespeed.
• Buildupof grass,leaves
and trash under mower.
• Worn, bentor looseblade.
• Bent engine crankshaft.
• Engine flywheel brake ison
when controlbar isreleased.
• Bent engine crankshaft.
• Blade adapterbroken.
• Blade draggingin grass.
:. Cutting height too low.
I: Lift on blade worn off.
Catcher notventing air.
• Low engine speed.
• Grass istoo high or wheel
height istoo low.
• Rear oflawn mower
housingor blade dragging
I° ingrass.
Grass catcher toofull.
!. Handle heightpositionnot
rightfor you.
CORRECTION
• Setto'Higher Cut"
position.
• Set to 'Higher Cut"
position.
• Clean/replace airfilter.
• Clean underside ofmower
housing.
• Check oillevel.
• Cut at slower walking.
speed.
• Replace blade. "lighten
blade bolt.
• Set all wheels at same
height
• Set engine speed control
infast position.
• Clean undersideof
mower housing.
• Replace blade. "13ghten
blade bolt.
• Contact an authorized
service center.
• Depress controlbar to
upper handle before
pulling starterrope.
• Contact an authorized
service center.
• Replace blade adapter.
• Move lawn mowerto cut
grass or to hard surface
to start engine.
• Raise cuttingheight.
• Replace blade.
• Clean grass catcher.
• Set engine speed control
in fast position.
• Raisecuttingheight.
• Raise rear of lawn mower
housingone (1) setting
higher.
• Empty grass catcher.
• Adjust handle heightto
suit.
Loading ...
Loading ...
Loading ...