Loading ...
Loading ...
Loading ...
ADJUSTING THE SHOULDER STRAP
ON THE COLLECTION BAG
• Carefully loop the shoulder strap
through the buckle as shown in the
illustration below.
Last In
FirstIn
• Positionthe uniton your dght-hand
side, blower outlet and bag pointing
toward the rear. Holdthe unitin an
uptight position,and supportthe low-
er vacuumtube on the ground.
• Placethe shoulder strap over your
head and onto your leftshoulder.
• Adjust the strapto allowa free flow
ofair from the blower. Ifthe collection
bag is kinked, the unitwill notoper-
ate properly.
NOTE: The strap isdesignedtoposition
the collectionbeg onyourshoulderwith-
out kinks. The strap isnot intendedto
supportthe weightofthe unit..
Shoulder strap
on leftshoulder
NOTE: If you are unable to locate the
inlet restrictor, the unit will still operate.
This restdctor improves the blower
function.
• Close the inlet cover and make sure
it is latched closed.
• Re-install the blower tubes. Refer to
the section A'R'ACHING THE BLOWER
TUBE AND NOZZLE for instructions on
how to attach these items.
EXTENSION CORD
Use onlya 120 A.C. voltagesupplyas
shownon nameplateof the unit.
The extensioncord usedto reachthe
power soume must be:
• Specificallymarked as suitable for
outdooruse.The cordmust be
marked withthe suffix"W-A."
• Heavy enoughto carrycurrentfrom
the power sourcethefull length of
extensioncordto the unit.Otherwise,
lossof powerand overheatingcan
occurcausingdamage to unit.Refer
to chartfor minimumwire gauge rec-
ommendations.The cord mustbe
marked with the properwire gauge.
(Appropriateextensioncords are
available.) Do notuse multiple cords.
• In goodcondition.Cord insulation
must be intactwith nocracks or
deterioration. Plugconnectorsmust
be undamaged.
MINIMUMWIREGAUGE
RECOMMENDATIONS
VC)LTSi25FT. 50 FT. 100FT.
120 16 16 14-
A.W.G." A.W.G." A.W.G."
•AmericanWireG=uge
No kinksin
Allowsfree air
flow
HOW TO CONVERT UNIT FROM
VACUUM USE TO BLOWER USE.
• Stop unitand unplugthe extension
cord.
• Remove the vacuum tubes and
collection bag.
• InslstF_irJnlet restdctorthat was re-
movedwhen assembling for vacuum
use.
Secure extensioncordto unitusing
the accessorycord lock (ifequipped)
or as follows:
• "Rethe power plugonthe unittothe
extensioncord asshown.
• Insertplug intocord socket.
Power Plugon Extension
Unit,_ Cord
Loading ...
Loading ...
Loading ...