Loading ...
Loading ...
Loading ...
CHECK FOR DAMAGED OR
WORN PARTS
Refer replacement of damaged/wom
parts to your Seers Service Center.
• On/Off Switch- Ensure switchfunc-
tkx_spropedybymo_ngtheswitchto
the Offpusilk_. Make suremotor
stope;then rsstsrt motorandcor_ue.
AFTER EACH USE
CLEAN UNIT & LABELS
• Stop the unitand disconnectthe ex-
tensioncord.
• Clean the unitusinga damp cloth
with a milddetergenL
• Wipe offunitwith a clean dry cloth.
YEARLY
CLEAN COLLECTION BAG
IMPORTANT: THE COLLECTION BAG
MUST BE PROPERLY EMPTIED.
• YOUmust properlyemptyand main-
tain the collectionbag to avoiddete-
riorationand obstruc_n of airflow.
• Stopthe unitand disconnectthe ex-
tensioncord.
• Remove the bag and empty after
each use. Do notstore bag without
emptyingthe bag of allcontents.
• Wash the bag once a year by turning
inside outand washing with a water
hose. Be sureto letbag dry com-
pletelybefore reusingthe unit.
HOW TO REMOVE AN OBJECT
FROM THE AIR INTAKE
NOTE: If the unitbecomes dogged, or
an objectis drawn intothe airintake,
stopthe unitand disconnectthe exten-
sioncord. Wait untilthe impellerhas
completelystopped turning,then re-
move the vacuumtubes. Carefutty
reach intothe vacuum opening and
clear outthe air intake area.
Inspect the impellerfor cracks. If
cracked or damaged, do not usethe
unit.Have parts replaced by your
Sears Service Center. Do notattempt
to replace them yourself.
PARTS AVAILABLE
Vacuum Tube Set ..... 530-402499
Inlet Restdctor ........ 530-402045
Collection Bag ....... . 530-402533
Gutter Kit ................ 71-79992
Safety Glasses ....... 71-85707
Extensmn Cord ..... i'i _ 71-5702
Prepare unitfor storage at the end of
the season or ifit will not be used for
30 days or more.
WARNING:
• Secure the unitbefore storing or
transporting.
• Store unitwith aftguards in place.
-Positionunitso that any sharp object
cannot accidentallycause injury.
• Store unitwell-outof the-reach of
children.
BLOWER STORAGE
• Diso00nect fromthe power source.
• Clean the entire unit.
• Open inlet cover and clean any dirt,
grass, ordebris that has collected.
Inspectthe blowerand all tubes.
Close end make sure the cover is
latched.
• Clean airventsand airinletof debds.
• Store your unitand extensioncord in
a well ventilated area and covered, if
possible,to preventdustand dirtac-
cumulation.Do notcover with plastic.
Plasticcannot breatheand may
cause condensationand eventual
rust or corrosion.
• Check entireunitfor loosescrews,
nuts, and bolts. Replace any dam-
aged, worn, orbroken parts.
10
Loading ...
Loading ...
Loading ...