Loading ...
Loading ...
Loading ...
ASSEMBLYINSTRUCTIONSFOR
USINGYOURUNITWITHTHE
OPTIONALVACUUMATTACHMENT
NOTE:Assemblyinstructionsfor using
yourunitas a blowerare explainedin
the previousses_on, ffyou have already
assembledyour unitfor useas a blower,
removetheblotler tubeand nozzis.
WARNING: Stop the un'_and discon-
nectfromthe power source before
openingthe inletcover or attemptingto
insertor remove the inlet restrictoror
vacuum tubes. The motormust be
stopped and the impellerblades no
longerturningto avoidserious injury
from the rotatingblades.
REMOVE THE INLET RESTRICTOR
An inletrestdctorisusedwhenusing
ycurunitas a blower.This restrictoris
notuseddudngvacuum.se, and must
be removedduringassemblyfor vscu-
um use.
NOTE: Be sure to keep the inlet re-
strictor for using your unitas a blower.
• Open the inlet cover by insertingthe
tipof a screwdriverintothe inletcover
latcharea, and twistingthe screwdriver
whilepullingthe inletcoveropen.
Bottomview
unit
• Rotatethe inlet restrictorcounter-
clockwise,and liftout of the unit.
Do notclosethe inlet door.Youwill
next attachthe vacuum tubes.
ATTACHING THE VACUUM TUBES
There are 2 vacuum tubes, an upper
and lower tube. The uppertube is cut
straighton both ends, and attaches to
the blower unit.The second tube is cut
an at angle on the lowerend. This
' -._angled end willpointtoward the
groundduringvacuum use.
• Locate the arrows on the upper vac-
uumtube and on the vacuum inlet
area of_heunit.
UpperVacuumTube
• While holdingthe inletcover open,
alignthe arrows and insertthe vacu-
um tube intothe opening. Twistthe
tube dock'wiseuntilitis seated. A
second arrowon the vacuumtube
willalignwith the arrow on the unit
once the tube twistedcompletelyin
place.
Alignarrowson tube & unit
• Attach the lower vacuum tube to the
upper vacuum tube by aligning the
arrows on the two tubes. Press the
tubes together until the lower tube is
fully seated in the upper tube. (About
3 inches)
Upper Lower
ATTACH THE COLLECTION BAG
Slide the openingof the collection bag
over the bloweroutlet. Pullthe strap
with Velcro tightlythrough the budde
and secure with Velcrotabs.
NOTE: Make sure the strap with
Velcro is locatedonthe bloweroutlet
as shown.Also, make surethe zipper
on the bag iscompletely clnsed.
Stropwith Velcro
C,dlectlon
Bag Mower Outer
6
Loading ...
Loading ...
Loading ...