Loading ...
Loading ...
Loading ...
5.3.3 Completion of installation
Finish the cut with a file (see fig. 5-25) in order to remove any burrs and/or
imperfections. Put back the base plate (see fig. 5-26) and try to open the dish-
washer door fully; if the base plate still obstructs the door, repeat the above
operations.
Fig. 5-24
Fig. 5-25
Fig. 5-26
Before securing the dishwasher to the adjacent units, attach the gaskets to
the sides.
Remove the adhesive band on the gasket (see fi g. 5-31).
Fix the gasket to the dishwasher, inserting it in the seat on the sides towards
the front (see fi g. 5-32), and making sure that the long side of the gasket, the
one with the hole for inserting the screw, is attached to the outside of the
dish-washer; the hole in the long side must match the hole in the dishwasher
(see ref. A fi g. 5-33). Make sure the gasket adheres perfectly to the
dishwasher.
Fig. 5-31
Fig. 5-32
EN
31
INSTALLATION INSTRUCTION
4
4
Depends on the models
Loading ...
Loading ...
Loading ...