Loading ...
Loading ...
Loading ...
5
ASSEMBLY INSTRUCTIONS
3
4
2
1
1. Turn OFF the electrical power at the main fuse or circuit.
DANGER: Failure to disconnect the power supply prior to
installation may result in serious injury or death.
2. Secure the upper mounting bracket to the outlet box
using screws, spring washers, provided with the outlet box
(not included).
Note: It is very important that you use the proper
hardware when installing the upper mounting bracket as
it will support the fan.
4. Place one tab of the lower bracket into a large slot in
the upper mounting bracket. Then slide the second tab
of the lower mounting bracket into the second large slot
on the upper mounting bracket until all four holes are in
alignment.
3. Remove the four mounting bracket screws from
underneath the lower mounting bracket. Then, remove
the ten motor screws and save for blade arm attachment.
Note: Remove the wire restraint from the wires on top of
the lower bracket.
Motor
Motor
Screw
Large Slot
Lower
Mounting
Bracket
Tab
Mounting
Bracket
Screw
Upper
Mounting
Bracket
Outlet Box
Upper Mounting Bracket
Loading ...
Loading ...
Loading ...