Loading ...
Loading ...
Loading ...
Care&
C_eaning the Cooktop, Burner Heads, Caps & Grates
The cooktop is designed to make cUeaning easier, Because the gas Burners are seaUed, cbanups are easy when spHbvers
are cbaned up
The cooktop, Burner Heads and Caps shouUd be routineUy cbaned. Keeping the Burner Head Ports clean wHUprevent
improper ignition and an uneven flame. Refer to the following instructions:
THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or Hftthe cooktop.
Use caution when repUacing the Burner Caps so the Electrodes are not damaged. This may cause a
delayed ignition or prevent the burner from igniting.
Any additions, changes or conversions required in order for this appliance to perform satisfactorily
must be made by an authorized Service Center,
Surface
Burner
Grate
Surface
To Remove and RepJace the Surface Burner Caps and Burner Heads -
Remove in the following order: (1st) surface Burner Grates, (2nd) Burner Caps and
(3rd) Burner Heads, Replace in the following order: Burner Heads, Burner Caps and
BurnerGrates,
Do not remove any parts from the cooktop until they have completely cooled
and are safe to handle. Do not operate the surface Burners without the Burner
Caps and Burner Heads property in ptace.
To Clean the surface Burner Caps and Burner Heads (all models)- Use a
soap°filled scouring pad or a mild abrasive cleanser to clean the surface Burner
Caps and Burner Heads. The ports (or slots) around the Burner Heads must be
routinely cleaned, if residue still remains in these ports, use a small-gauge wire or
needle to clean the slots or hobs, For proper flow of gas and ignition of the
burner--DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER
MATERIAL TO ENTER THE GAS ORIFICE HOLDER OPENING. ALWAYS keep
the surface Burner Caps and Burner Heads in place whenever the gas Burners are
in use,
Figure 1
Orifice
holder
To CJean the Burner Grates (all models)- Be sure burners and grates are coo!
before you place your hand, a pot holder, cleaning cloths or other material on them,
The cast iron burner grates can be washed in hot soapy water, Rinse thoroughly
and dry the grates with a cloth - don't put them on the cooktop while still wet, Be
sure the grates are positioned securely over the burners,
To remove burned on food, place the grates in a covered container or plastic bag, Add
1/4 cup ammonia and soak for 30 minutes, Wash, rinse well and dry, An abrasive
cleaner can be used for stubborn stains,
To CJean the Cooktop and contoured areas of the cooktop (for modeJs with
Porcelain Cooktop only}- If a spill occurs on the porcelain cooktop, blot up spill
with an absorbent cloth, Rinse with a clean, damp cloth and wipe dry, Do not use
harsh abrasive cleaners on the cooktop, They can scratch the porcelain,
Completely rinse any mild cleaners used from the surface or the porcelain cooktop
may become damaged during future heating, DO NOT use spray oven cleaners on
the cooktop,
To Ctean the Ceramic GJass Cooktop (for models with Ceramic GJass
Cooktop onty)- SeeCeramic Glass Cooktop Cleaning & Maintenance later in this
section,
9
Loading ...
Loading ...
Loading ...