Loading ...
Loading ...
Loading ...
5| Version 1 | September 2021
Table of Contents
Crank and Pedal Checks
A – Use a 15mm pedal wrench to ensure the pedals are secure. Keep in mind the user left pedal is reversed-threaded.
B – Check the crank bolt to ensure it is tight.
Frame Bolts
From time to time, especially after a few uses when a product is new, you may see frame bolts starting to loosen. This can cause noise issues. This is natural and
happens as the product settles to the floor and begins to be used. It is important after the first few uses, and then on a monthly basis, that you check the frame
bolts. If you find loose bolts, it would be a good idea to add a medium-strength thread locker to the bolt threads before tightening. Once the thread locker cures,
it will help prevent bolts from coming loose again. Cure times for thread locker is generally 24 hours so, it is best to do this and not use the product during that
time.
Tools needed for tightening bolts: metric Allen sockets (3mm-8mm) and ratcheting wrench
Loading ...
Loading ...
Loading ...