Loading ...
Loading ...
Loading ...
12
Perfect!
The well-being feeling is a subjective condition: for this reason,
dierent people may judge dierently the same environmen-
tal conditions. In particularly severe environmental conditions
(high temperature or humidity outside, poor insulation, too
many people, high heat in the room, strong exposure to the sun,
etc...) this device may not be able to reach the best comfort level.
WIFI FUNCTION
To activate or deactivate the WiFi function, keep touching the
WiFi button on the remote control for a few seconds until the
emission of a double beep.
Once the WiFi icon is displayed it means that the WiFi features
are available.
SYMBOL WIFI FIXED
it means that the WiFi features are active AND the
“Home WLAN”
has been found.
SLOW FLASHING
it means that the appliance is searching for the
“Home WLAN” .
FAST FLASHING
it means that the “Home WLAN” has not been
found or has not been set yet.
“APP CONTROL “ ICON
When the APP CONTROL icon appears it means that
the last command has been received via app.
If the memorized
“Home WLAN”
settings needs to be changed,
proceed as follows:
a) keep touching for about 20 seconds the MODE button C2
on the control panel until a prolonged beep is emitted;
b) use the app to enter the new WLAN settings into the unit.
SETTING THE TIMER
Timer programming is an exclusive function of the app: thanks
to the many possibilities of timer programming, you can prevent
wasting electricity by optimizing the operating period, setting
delayed start up or shut down of the appliance.
FCC AND CANADA EMC COMPLIANCE
INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, includ-
ing interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harm-
ful interference to radio or television reception, which can
be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and re-
ceiver.
• Connect the equipment into an outlet on a circuit dierent
Perfect!
HUMIDITY
TEMPERATURE
HIGH
MEDIUM
LOW
HIGH
MEDIUM
LOW
Operating curve
ORANGE LIGHT: Room conditions far
from optimal level.
GREEN LIGHT: Most people feel good
room conditions, near optimal level.
BLUE LIGHT: Best comfort level.
Loading ...
Loading ...
Loading ...