Loading ...
Loading ...
Loading ...
6.1 OPERATING
1. To assemble the jack, loosen collar screw and insert handle into socket, ensuring it is
correctly aligned. Tighten collar screw and ensure correct operation of pressure relief
knob.
2. Prior to operating the jack, remove any accumulated air from the system as follows:
Loosen the pressure relief knob anti-clockwise, whilst held in this position, pump the
jack several times to ensure internal lubrication and bleed the accumulated air from the
system.
3. Tighten the pressure relief knob and the jack is now ready for use.
4. IMPORTANT: Prior to lifting the load, ensure that all of the aforementioned safety
instructions are followed.
5. The wheels of the jack should always rotate freely.
6. These jacks are fitted with a foot pedal that gives a faster approach to the load.
For lifting, either pump the foot pedal or move the handle up and down, using the
full stroke range of the piston for greater speed. Secure the lifted load as an essential
safety measure with an appropriate axle stand.
7. Before lowering, lift the vehicle to remove the axle stands, ensuring that there are no
persons or obstacles under the vehicle to be lowered. Slowly rotate the pressure relief
knob anti-clockwise on the top of the jack handle and gently lower the jack. When
completed, lock the jack handle in the upper position (if applicable).
4.1 SCOPE
This jack is designed to lift vehicles to the maximum stated weight limit and height.
4.2 SPECIFICATION
Stock No: .............................. 03461.................. 03463.................... 03467.................03494
Part No: ................................TJ2LR.................. TJ3LR ...................TJ5LR .............TJ10LR
Rated load ............................2,000kg ...............3,000kg ................. 5,000kg ..........10,000kg
Maximum lifting range ...... 140-180mm .........140-620mm ...........160-560mm .. 170-570mm
Weight (nett) ..........................58kg ................... 68kg...................... 85kg..................125kg
EXTREMELY IMPORTANT: Read these safety instructions carefully in addition to
the instructions for use, operation and maintenance. Keep the instructions sheet in an easy
to find place as you may need to use it again.
This jack has been designed for use in the elevation of vehicles.
Any other application, beyond the conditions established for use of this jack will be
considered inappropriate.
Handle the jack correctly and ensure that all parts are in good condition prior to its use.
Only authorised persons should operate the jack having read carefully and understood the
contents of this manual.
Do not modify the jack in any way.
Non-compliance with these rules may result in injury or damage to the user, the jack or the
vehicle to be lifted.
The manufacturer accepts no responsibility for the improper use of the jack.
4.3 HANDLING AND STORAGE
Care must still be taken when handling and lifting. Dropping this jack will have an effect on
the jack and may also result in personal injury. This jack is not a toy and must be respected.
The environment will have a negative result on its operation if you are not careful. If the air
is damp, components will rust. If the jack is unprotected from dust and debris; components
will become clogged: and if not cleaned and maintained correctly or regularly, the jack will
not perform at its best.
6. OPERATING INSTRUCTIONS
4. INTRODUCTION
5
8
Loading ...
Loading ...
Loading ...