Loading ...
Loading ...
Loading ...
7.1 MAINTENANCE
1. IMPORTANT: Both the maintenance and repair of the jack may only be performed by
qualified persons, who have sufficient knowledge of the hydraulic systems used in
these devices as a result of their training and experience.
2. Keep the jack clean and lubricate all moving parts at regular intervals, which must be
clean and protected from aggressive conditions at all times.
3. Only original spare parts should be used.
4. Prior to each use, check for bent, broken, cracked or loose parts. Do not use if any
defects are present. If it is suspected that the jack has been subjected to abnormal
loads or has suffered any knocks, withdraw it from service until the problem has been
rectified.
5. If the oil level needs to be checked or refilled, with the piston fully retracted, remove the
filler plug and drain its contents into a container. With the jack in a horizontal position,
proceed to introduce the necessary volume of oil required.
6. Make sure that no dirt enters with the new oil.
7. Following a period of prolonged intensive use, it is recommendable to change the oil in
order to extend the useful life of the jack.
8. IMPORTANT: An excess of oil to the volume required may render the jack inoperative.
9. Only use suitable hydraulic oil. Never use brake fluid.
10. When the jack is not in use, make sure the lifting arm is fully retracted to avoid
corrosion. Apply an anti-corrosion product to the pistons, if appropriate.
11. Keep the jack in a clean, dry place and out of children’s reach. Remove the operating
handle.
12. At the end of the useful life of the jack, drain off the oil and hand it over to an
authorised agent and dispose of the jack in accordance with local regulations.
3.1 GUARANTEE
Draper tools have been carefully tested and inspected before shipment and are guaranteed
to be free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor
or contact:
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or:
Product Helpline (023) 8049 4344.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or
workmanship, repairs will be carried out free of charge. This guarantee period covering
parts/labour is 12 months from the date of purchase except where tools are hired out when
the guarantee period is 90 days from the date of purchase. This guarantee does not apply
to normal wear and tear, nor does it cover any damage caused by misuse, careless or
unsafe handling, alterations, accidents, or repairs attempted or made by any personnel
other than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage
charges will be quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations
of its terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated
receipt or invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory
rights.
Draper Tools Limited.
7. MAINTENANCE
3. GUARANTEE
9
4
Loading ...
Loading ...
Loading ...