Loading ...
Loading ...
Loading ...
OPERATION
SPARK
SAFETY
IGNITION
CHOKE
CON-
TR_
THROTTLE
/ ENGINE
CONTROL
RECOIL
(AUXILIARY)
STARTER
HANDLE
POWER
CORD
PLUG
PRIMER
NOTE: ITEMS ABOVE
ARE SHOWN IN
THEIR TYPICAL
LOCATION ON THE
ENGINE. ACTUAL
LOCATION MAY VARY
WITH THE ENGINE
ON YOUR UNIT.
AUGERS
ELECTRIC
START
BUTTON
ENGINE OIL CAP AUGER
DIPSTICK CONTROL
GASOLINE
FILLER
CAP
CHUTE
DEFLECTOR
OIL
PLUG
DIS(
CHUTE
FUEL
SHUT-OFF CLEAN-
VALVE OUT
TOOL
DRIVE
SPEED
CONTROL
LEVER
DISCHARGE
CHUTE
CONTROL
TRACTION
DRIVE
CONTROL
LEVER
LIGHT
HANDLE
KNOB
MUFFLER
rOOLBOX
PLATE
FIG.8
MEETS A.N.S.I. SAFETY REQUIREMENTS
Our snow throwers conform to the standards of the American National Standards Institute.
Toolbox - used to store spare shear bolts, locknuts and
wrench,
Safety ignition key - must be inserted for the engine to
start and run, Remove when snow thrower is not in use,
Electric start button - used for starting the engine,
Recoil (auxiliary) starter handle - used for starting the
engine.
Primer - pumps additional fuel from the carburetor to the
cylinder for use when starting a cold engine.
Choke control - used for starting a cold engine.
Throttle/engine control - used to select either FAST or
SLOW engine speed and to STOP the engine,
Traction drive control lever - used to engage power-pro-
pelled forward or reverse motion of snow thrower.
Auger control lever -used to engage auger motion (throw
snow).
Discharge chute control lever - used to change the di-
rection the snow is thrown.
Skid plate - used to adjust height of scraper bar from the
ground,
Loading ...
Loading ...
Loading ...