Loading ...
Loading ...
Loading ...
ASSEMBLY / PRE-OPERATION
NOTE: The multi-wrench may be used for assembly of the
chute rotator head to snow thrower and making adjustments
to the skid plates.
UNFOLD UPPER HANDLE
1, Raise upper handle to theoperating position and tighten
handle knobs securely.
INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)
1, Remove plastic tie securing rod to lower handle,
2, Insert rod into speed control bracket and secure with
retainer spring,
SPEED
CONTROL i
',, ,,,
LOWER
HANDLE
FIG. 1
SPEED CONTROL ROD
RETAINER
SPRING
SPEED SPEED
CONTROL CONTROL
BRACKET LEVER
INSTALL TRACTION DRIVE CONTROL ROD
(See Figs. 3 and 4)
The traction drive control rod has the long loop on the end
of the spring as shown.
1. Slide rubber sleeve up rod and hook end of spring into
pivot bracket with loop opening down as shown,
2. With top end of rod positioned under left side of control
panel, push rod down and insert top end of rod into hole
in drive control bracket, Secure with retainer spring,
FIG. 3
)N DRIVE RETAINER
SPRING
CONTROL
BRACKET
FIG. 4
FIG. 2
Loading ...
Loading ...
Loading ...