Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
Affinity 25E
Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA
Phone 503.626.1802 | Fax 503.213.5869 | www.evoamerica.com | [email protected]
16
STEP 8: Place cook surface over circular skirt with the three support tabs (located under
cook surface) resting on the chassis skirt top. Position the rear support tab of the cook
surface to the right of the rear seam of the chassis skirt (A). Then rotate the cook surface
clockwise until the support tab is in line with the seam (B) and the rear bullet secures in the
chassis slot (C) .
INSTALLING COOK SURFACE
BOTTOM-UP VIEW OF
REAR COOK SURFACE
CUT AWAY VIEW OF REAR COOK
SURFACE SHOWING BULLET
ENGAGED IN CHASSIS SLOT
A
B
C
Rear Bullet
Cook surface tie-down J-hooks pass through tubes
allowing threaded end of J-hook to extend into spillover
tray enclosure and be secured with 1/4”x20 nut at each
right and left sides.
Loading ...
Loading ...
Loading ...