Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 105914779727/A
e
Preliminary operations
In case there is residual water inside the
reservoir:
1. Open the door.
2. Place the deep pan on the third shelf from
the bottom. Push it against the rear wall of
the oven cavity.
3. Touch the START button to start
draining the water into the jug.
The water starts to flow into the deep pan from
the drain pipe on the right side of the rear wall
of the oven cavity.
4. Wait for the end of the drain flow.
5. Drain the water from the deep pan.
6. Touch the CONFIRM button to
continue the function.
Reservoir filling
1. Mix 100 g of citric acid with 650 ml of
water in a jug.
2. Open the door and pull the loading drawer
out of its housing.
3. Insert the funnel provided in the loading
drawer.
4. Pour the water softener (using a bottle or a
measuring jug) until the reservoir max. level
indicator light (in the information area
on the right) shows that the max. level
has been reached .
5. At the end, remove the funnel and place the
loading drawer back in its place.
Boiler descaling function
1. Close the door
2. Touch the START button to start the
function.
3. Descaling starts.
At the end of the descaling process the display
shows the request to drain the water softener.
Reservoir draining
1. Open the door.
2. Place the deep pan on the third shelf from
the bottom. Push it against the rear wall of
the oven cavity.
3. Touch the START button to start
draining the water softener.
The water softener starts to flow into the deep
pan from the drain pipe on the right side of the
rear wall of the oven cavity.
4. Wait for the end of the drain flow.
When finished, the reservoir indicator light
(in the information area on the right) and
the display indicate the end of the water
softener drain process.
5 Drain the water softener from the deep pan.
Cleaning of reservoir and hydraulic circuit
Once the water softener has been drained, the
appliance starts the cleaning procedure for the
reservoir and the hydraulic circuit.
The display will show the request to fill the
reservoir with water.
1. Open the door and pull the loading drawer
out of its housing.
2. Place the deep pan on the third shelf from
the bottom. Push the tray up against the rear
wall of the oven cavity.
3. Pull the loading drawer out of its housing.
4. Insert the funnel provided in the loading
drawer.
5. Pour one litre of water using a bottle or a
measuring jug.
6. When you have finished filling water into the
reservoir, touch the CONFIRM button
to continue with the function.
From now on, it will no longer be
possible to cancel the descaling
process.
Do not use lactic acid or other
descaling agents.
Take care: the water softener may be
still hot.
Use cold tap water which is not too
hard, softened water or still mineral
water.
Do not use distilled water, tap water
with a high chloride content (> 40 mg/
l), or other liquids.
The overflowing of water inside the
oven cavity is not intended as a
malfunction, rather it is part of the rinsing
procedure.
Loading ...
Loading ...
Loading ...