Loading ...
Loading ...
Loading ...
FIRST TIME USE
When the microwave is plugged in for the fi rst time,
the display will show “0:00”. Use the number pad
to enter the current time and then press the clock
button to confi rm.
The microwave will return to standby mode if there
is no input within 60 seconds.
During operation:
• Press the Start/+30SEC button to begin
operation.
• Press the Stop button to cancel the cooking
program.
• The microwave will beep fi ve times at the end of
a cooking program.
OPERATING INSTRUCTIONS
MICROWAVE COOKING
1. Press the Time Cook button. The display will
show “00:00”.
2. Use the number pad to enter the desired cooking
time. The maximum time is 99 minutes and 99
seconds.
3. Press the Power button to choose a power level.
The default power level is 100%. The display
will show “PL10”. Use the number pad to enter
the desired power level if 100% is not required.
Consult the chart at the bottom of the page for
information on power levels.
4. Press the Start/+30SEC button to begin
operation.
Note: If “PL0” is selected, the microwave fan will
run with no cooking function. This power level can
be used to remove odors from the oven.
Note: During cooking, if the chosen power level is
not suffi cient, press the power button. The current
power level will fl ash for three seconds. Use the
number pad to choose a new power level and
operation will continue in the new power level.
Number Pad 012345678910
Cooking Power 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Display PL0 PL1 PL2 PL3 PL4 PL5 PL6 PL7 PL8 PL9 PL10
TWO STAGE COOKING
Some recipes require different stages of cooking
at different temperatures. To set a two stage cook
program:
1. Press the Time Cook button and use the number
pad to enter the desired cooking time for the fi rst
stage.
2. Press the Power button and use the number
pad to enter the desired power level for the fi rst
stage.
3. Press the Time Cook button and use the number
pad to enter the desired cooking time for the
second stage.
4. Press the Power button and use the number pad
to enter the desired power level for the second
stage.
5. Press the Start/+30sec button to begin
operation.
SETTING THE CLOCK
The clock can be only be set as a 12 hour clock.
To set the current time:
1. Press the Clock button.
2. Use the number pad to enter the current time.
3. Press the Clock button to confi rm.
During operation, press the Clock button to see the
current time.
Loading ...
Loading ...
Loading ...