Loading ...
Loading ...
Loading ...
3
| P a g e
INSTALLATION
Tools Needed:
* Pencil *Hammer *Level *Screw Driver *Power Drill and drill bits
A mounting bracket is provide with the heater which has been specifically designed to allow this
product to be fitted to ceiling or wall before drilling the holders for the ceiling/wall is solid and
that there are no hidden water pipes or electric wires.
ATTENTION! The appliance must be installed on the solid surfaces like concrete, wood or metal
etc.
Important: Ensure that the supply cables is well mounted and that it does not come into contact
with reflector of the heater or that does not trail into heated area, the supply cable can be fixed to
the metal mounting bracket behind heater with plastic zip ties.
1. This heater should be installed by a competent person, i.e. a qualified electrician.
2. Always disconnected the heater from the electricity supply and allow it to cool before
installation.
3. This heater can be mounted in a horizontal or vertical manner, but for a higher efficiency we
recommend horizontal usage.
4. For both wall and ceiling mounting, the lowest part of the heater must be located at or above a
minimum height of 2.4m/94.5” from ground level, so that the heater can not be touched when
in operation.
5. For wall mounting, there must be a 2.4m/94.5” distance from your appliance to the ground.
For ceiling mounting, there must be a 2.4m/94.5” distance from your appliance to the ground.
6. For both horizontal and vertical mounting on the wall, there must be a min. distance of
0.4m/15.8” between the appliance and the ceiling.
7. The distance from your appliance from the corners should be min. 0.4m/15.8” for vertical use
and min. 0.5m/19.7” for horizontal use.
8. When installed to the ceiling, there must be a distance of 0.5m/19.7” between corners and the
appliance.
9. The distance of your appliance from the living beings is to be min 1m/39.4”.
10. The distance from the front side of the heater to materials such as wood, carton, cloth etc.,
must be min 1m/39.4”.
11. When mounting horizontally or to a ceiling, do not position the heater at an angle more than
90°and less than 45°.
12. The supply cable must be at the lower end of the heater if the heater is installed at an angle or
vertically.
13. Keep the supply cord away from the body of the heater which will get hot during use.
14. Do not install the heater on an inflammable surface.
15. Observe the minimum safe distance between the heater body and the inflammable surfaces
when mounted.
16. The heater should always have a minimum clearance of 0.5m/19.7” from a ceiling and adjacent
wall.
17. If the heater is to be used outside, a weatherproof outlet is recommended.
18. Before drilling ensure that there are no wires or water pipes in the area where the heater is to
be installed.
19. The heater must be installed on the mounting brackets provided.
Loading ...
Loading ...
Loading ...