Loading ...
Loading ...
Loading ...
8. Plug the power cord into an electrical outlet and press the On Button (C). NOTE: When the steriliz-
er is turned on, you will notice that cycle indicator lights (E) will illuminate with a cycle of
RED-BLUE-GREEN colors. After this initial cycle-through of colors, the green symbol will remain lit
indicating “READY” mode.
Ready Cycle: With the green “ready” symbol illuminated, press the cycle start button (D).
Heat Cycle: The red symbol will indicate that the appliance is “HEATING” to create steam. It will
remain lit until all water is consumed and the sterilization cycle is complete. This is approximately
8 minutes but may vary by the amount of water you add, the number of items to be sterilized and
other environmental factors.
Cool Down Cycle: Upon the completion of the sterilization cycle, the blue symbol will illuminate
to indicate the “COOL DOWN” cycle. Note: If you forget to add water to the unit and start the
heating cycle (red light on), the unit must complete the cool down cycle (blue light on) before a new
“heat”cycle can be attempted. CAUTION: DO NOT OPEN STERILIZER DURING COOL DOWN CYCLE.
READY (unload) Cycle: When the cool down cycle is complete, the green “READY” symbol will
again light. You may unload your items or allow them to air dry.
9. Open the main cover and remove all bottles and place on a countertop or other flat surface. Open
the top cover and re-assemble the bottles with the various components.
10. You may now turn the unit off by pressing the on-off button (C) or begin another sterilization cycle
after again adding 3 oz/80 ml of water.
TO CLEAN THE APPLIANCE:
The Dr. Brown’s Natural Flow
®
Deluxe Bottle Sterilizer should be cleaned at least once a week when
in regular use. Wait at least 60 minutes
after a sterilization cycle to allow the device to cool. Before cleaning your device ALWAYS disconnect
the power plug from the outlet.
• The removable tray, tongs and measuring cup can be cleaned in hot soapy water and rinsed
completely.
• The base exterior and heating chamber and two covers can be cleaned with a damp sponge or
damp cloth.
CAUTION: DO NOT IMMERSE THE STERILIZER BASE IN WATER. DAMAGE TO ELECTRICAL
COMPONENTS WILL RESULT.
TO CLEAN THE HEATING ELEMENT:
Mineral deposits may form on the metal heating element in the bottom of the heating chamber. It is
important to de-scale this appliance every 4 weeks to ensure that it continues to work properly.
• Unplug the device.
• Remove the tray.
• De-scale utilizing a 3.5 oz/100 ml mixture of vinegar/water:
1) Fill measuring cup to FILL LINE (3 oz/80 ml) with white vinegar.
2) Then add cold water up to the dashed line (.5 oz/20 ml), for a total of 3.5 oz/100 ml.
3) Pour directly over the heating element.
4) Turn the unit on and run a sterilization cycle.
5) Empty any remaining solution and rinse with clean water.
NOTE: DO NOT USE BLEACH, HARSH ABRASIVES OR SOLVENTS TO CLEAN THE HEATING
CHAMBER OR HEATING ELEMENTS AS THEY MAY CAUSE PERMANENT DAMAGE AND WILL VOID
THE WARRANTY.
RETURN POLICY
LIMITED PRODUCT WARRANTY:
The Dr Brown’s Natural Flow
®
Deluxe Bottle Sterilizer includes a one year warranty against defects in
material and workmanship from date of purchase. In the unlikely event of a malfunction or defect
during the warranty period, Handi-Craft
Company, at its option, will replace or repair the product under
warranty. Upon receipt of the product and the proof of purchase with a valid date of purchase, the
defective part will be immediately repaired or replaced and returned to you free of charge (in USA only).
Please send the defective unit, proof of purchase with valid date of purchase and description of the
problem to:
Handi-Craft Company
4433 Fyler Ave.
St. Louis, MO 63116
Attention: Dr. Brown’s Natural Flow
®
Deluxe Bottle Sterilizer Warranty
PLEASE NOTE: This warranty does not cover a defect that has been caused by negligence, accidents
or improper use of the appliance. If you have any question please contact us at drbrownsbaby.com or
1-800-778-9001. Household use only.
1 Year Limited Warranty.
4
WSW003_F1