Loading ...
Loading ...
Loading ...
NO T E: If the refrigerator has been placed in a horizontal or tilted position for any period of time, wait 4
hours before plugging the unit in.
1) Use this appliance only for its intended purpose as described in this use and care guide.
2) This refrigerator must be properly installed in accordance with the installation instructions before it is
used. See Electrical Requirements in the Set Up & Use section.
3) This refrigerator should not be recessed or built-in an enclosed cabinet. It is designed for freestanding
installation only.
4) Never unplug your refrigerator by pulli
mly and pull
straight out from the outlet.
5) Repair or replace immediately, all electric service cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion damage along its length, the plug or the
connector end.
6) If your old refrigerator is not being used, we recommend that you remove the doors. This will reduce
the possibility of danger to children.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE:
WHEN USING THIS APPLIANCE, ALWAYS EXERCISE BASIC SAFETY
PRECAUTIONS, INCLUDING THE FOLLOWING:
WARNING
AFTER YOUR REFRIGERATOR IS IN OPERATION, DO NOT TOUCH THE COLD
SURFACES IN THE FREEZER COMPARTMENT, PARTICULARLY WHEN HANDS ARE
DAMP OR WET. SKIN MAY ADHERE TO THESE EXTREMELY COLD SURFACES.
WARNING
PAGE 4 SAFETY INFORMATION
ENGLISH
7) Do not use any electrical device or any sharp instrument in defrosting your refrigerator.
.sriaper yna gnikam erofeb ro gninaelc erofeb rotaregirfer ruoy gulpnU )8
NOTE: deifitrec a taht dnemmocer ylgnorts ew ,ecivres seriuqer tcudorp siht nosaer yna rof fI
technician perform service.
9) Do not operate your refrigerator in the presence of explosive fumes.
SAVE THESE INSTRUCTIONS
RISK OF CHILD ENTRAPMENT. BEFORE YOU THROW AWAY YOUR OLD
REFRIGERATOR OR FREEZER, TAKE OFF THE DOORS. LEAVE THE SHELVES IN
PLACE SO THAT CHILDREN MAY NOT EASILY CLIMB INSIDE.
DANGER
JANUARY 2012
HT18TS45SW
Loading ...
Loading ...
Loading ...