Loading ...
Loading ...
Loading ...
WIRING A WALL-MOUNTED 3-SPEED FAN CONTROL
1. Use 4 Position switch (OFF – LOW – MED – HIGH).
2. Power supply required for these ventilators is 15 amps. @120V. AC, 60Hz. connected per local codes.
3. Run three #14 AWG wires (black, white and green) from the power supply at the electrical circuit panel
to the wall box (see Figure 7).
4. Run electrical conduit per local code from wall box to bottom of remote fan as shown (see Figure 7).
5. Run five #14 AWG wires in conduit between ventilator J-box and 4 position switch. Use color coded
wires corresponding to colors shown (see Figure 7).
6. Use wire nuts to connect wires as shown (see Figure 7).
Loading ...
Loading ...
Loading ...