Sencor SES 1710BK Espresso Machine

User Manual - Page 3

For SES 1710BK.

PDF File Manual, 7 pages, Read Online | Download pdf file

SES 1710BK photo
Loading ...
Loading ...
- 3 -
06/2020
Copyright © 2020, Fast ČR, a.s.
Before you begin brewing coffee, check that the portafilter is properly attached to the
brew head. Pressure is created in the portafilter during the coffee steaming process,
so do not move it while it is running. Otherwise, this could result in adangerous
situation.
Attention:
Incorrect use may lead to injuries.
When operating the appliance, be especially careful to avoid scalding by hot water
or steam.
Regularly inspect the water level in the water tank when using the appliance. When
the water level falls below the minimum water level mark, add water. Before adding
water, first turn the appliance off and disconnect it from the power socket.
To protect the pump from damage, the appliance is equipped with abuilt-in thermal
fuse that will disengage it when it runs empty. In the event that such asituation
occurs, disconnect the power cord from the power socket and allow the appliance
to cool down for at least 30 minutes. Then you may continue using it.
Accessible surfaces of the appliance are hot during its use and afterwards as a result
of residual heat. Do not touch hot surfaces.
Always turn off the appliance and disconnect it from the power socket when not
using it, when leaving it without supervision, before disassembling or assembling
it, before filling up the water tank, and before moving or cleaning it. Allow the
appliance to cool down before cleaning or moving it. Do not move the appliance
with acoffee cup located on the drip tray grate or with cups located on the cup
warming surface.
Keep the appliance and its accessories in clean condition. Clean and maintain it
according to the instructions in chapter Cleaning and maintenance. Never wash
the appliance under running water or submerge it in water or another liquid.
Make sure that the power cord does not come into contact with ahot surface and
prevent the power plug from coming into contact with water.
Disconnect the appliance from the power socket by pulling on the plug, never pulling
on the power cord. Otherwise, this could damage the power cord or the socket.
In the event that the power cord is damaged, have it repaired at aprofessional
service centre to prevent causing adangerous situation. It is forbidden to use the
appliance if it has adamaged power cord.
To avoid the danger of injury by electrical shock, do not repair the appliance yourself
or make any adjustments to it. Have all repairs performed at an authorised service
centre. By tampering with the appliance, you risk voiding your legal rights arising
from unsatisfactory performance or quality warranty.
Loading ...
Loading ...
Loading ...