Loading ...
Loading ...
Loading ...
EN
FAQ
205
Images are overexposed Flash is activated in bright surroundings Change the flash mode
Strong light source in the image Avoid strong light sources in picture composition
(Half) backlight falling into the lens (also from light
sources outside the image range)
Use the lens hood or change to another subject
Out of focus/picture stabilizer not functioning Exposure at a dark location without flash Use a tripod
The image is grainy or there is image noise ISO sensitivity set too high Decrease ISO sensitivity
Horizontal stripes Picture was taken with electronic shutter under a light
source like a fluorescent lamp
Try shorter shutter speeds
Unnatural colors and brightness Picture taken in artificial light or extreme brightness Set white balance or select correct lighting presets
No images are displayed Memory card is empty or not inserted
Images cannot be displayed File name of the image was changed on a PC Use appropriate software for image transfers from a PC
to the camera; available from the Leica AG website
Video quality
Video recordings show flickering/stripes Light source interference in artificial lighting
Select a different frame rate (suitable for the local AC
grid frequency) under Video ResolutionVideo Resolution
Camera noise in video recording The setting dials were used Avoid using the setting dials during video recordings
No sound on video recording Playback volume is set too low Increase playback volume
Microphone was covered during recording Make sure the microphone is not obstructed while
recording video
Speakers are covered Make sure that speakers are unobstructed during
playback
Microphone was deactivated while recording Activate the microphone
Flickering or horizontal stripes in the video
recording
CMOS sensors will display this phenomenon when light
sources like LED lamps or fluorescent tubes are used
Quality may be improved by selecting a manual shutter
speed (e.g. 1/100s)
Loading ...
Loading ...
Loading ...