Pleasant Hearth PHZCI32NG User Manual

Loading ...

CARE AND MAINTENANCE

LOG SET

• If you remove the log set for cleaning, refer to pages 20 & 21, for placement instructions.

• Replace log set if broken or chipped (dime sized or larger).

CABINET

Air Passageways

Use a vacuum cleaner or pressurized air to clean.

Exterior

Use a soft cloth dampened with a mild soap and water mixture. Wipe the cabinet to remove dust.

Burner

Tube

Primary Air

Inlet Hole

Fig. 24.1 - LP Primary Air

Inlet Slot on Burner Tube

1. Shut off unit including pilot. Allow unit to cool for at least 30 minutes.

2. Inspect burner, pilot and primary air inlet holes on orice holder for dust and dirt (See Fig. 24).

3. Blow air through the ports/slots and holes in the burner.

4. Check the orice holder located at the end of the burner tube again. Remove any large particles

of dust, dirt, lint or pet hair with a soft cloth or vacuum cleaner nozzle.

5. Blow air into the primary air holes on the orice holder.

6. In case any large clumps of dust have now been pushed into the burner repeat steps 3 and 4.

Clean the pilot assembly also. A yellow tip on the pilot ame indicates dust and dirt in the pilot

assembly. There is a small pilot air inlet hole about 2" from where the pilot ame comes out of the

pilot assembly (see Figures 34 or 35 depending on model). With the unit off, lightly blow air through

the air inlet hole. You may blow through a drinking straw if compressed air is not available.

Fig. 25.2 - NG Pilot Inlet Air Hole

Burner

Tube

Primary Air

Inlet Holes

Fig. 24.2 - NG Primary Air

Inlet Slot on Burner Tube

Fig. 25.1 - LP Pilot Inlet Air Hole

Thermal

Couple

Pilot Air

Inlet Hole

Pilot Air

Inlet Hole

Loading ...

Pleasant Hearth PHZCI32NG 32" Vent-Free Zero Clearance Natural Gas Insert