Loading ...
Loading ...
Loading ...
English 23
Installation
C
3. Hold the adaptor and turn part (C) in the
arrow direction to loosen it by 5 mm (*).
C
4. Insert the adaptor onto the water tap, and
then tighten the screws while lifting the
adaptor.
5. Turn part (C) in the arrow direction to tighten
it.
D
6. While pulling down part (D) on the water
hose, connect the water hose to the adaptor.
Then, release part (D). The hose fits into the
adaptor with a clicking sound.
7. To complete connecting the water hose, see
2 and 3 on the “Connecting to a threaded
water tap” section.
NOTE
• After connecting the water hose to the adaptor, check if it is connected properly by pulling the
water hose downwards.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the spacer ring
before inserting the tap into the adaptor.
WW3000TM_7-9KG_Kuwait_8C104-000586_EN.indd 23WW3000TM_7-9KG_Kuwait_8C104-000586_EN.indd 23 2021-01-15 4:08:482021-01-15 4:08:48
Loading ...
Loading ...
Loading ...