Loading ...
Loading ...
Loading ...
Muffler
Spark Plug
Oil Fill Plug
Shaft Grip
On/Off Sto
Control
D-Handle
Starter
Rope
Grip
Fuel
Cap
Craftsman®
Convertible TM
Coupler
Throttle
Control
Shaft
Housing
Trimmer
Attachment
Air Filter
Cover
Line
Cutting
Blade
_Att acCutt inr_gshield
HassleFree TM
Cold
Starting
Lever
Primer
Bulb
WARNING: DO NOTATFEMPT TO USETHIS UNIT
UNTIL THE D-HANDLE HAS BEEN ROTATED INTO
OPERATING POSITION (Fig. 1).
ADJUSTING THE D-HANDLE
1. Loosen the screws on the D-handle (Fig. 1).
On/Off Stop Control
Shaft
Housing
(4) Screws
Shaft Grip
Minimum6
(15.24 cm)
D-Handle
Bottom Clamp
Fig. 1
2. While holding the unit in the
operating position (Fig. 2), position
the D-handle to the location that
provides you the best grip.
3. Tighten the clamp screws evenly,
until the D-handle is secure.
INSTALL LINE TRIMMER
ATTACHMENT
NOTE: To make installation easier, place
the unit on the ground or on a
workbench.
1,
2.
Turn knob counterclockwise to loosen
coupler (Fig. 15, p. 8).
While firmly holding attachment, push
it straight into the coupler until the
release button snaps into the primary
hole (Fig. 16, p. 8).
Fig. 2
NOTE: Aligning the release button with the guide recess (Fig. 16,
p. 8) will help installation.
3. Turn the knob clockwise to tighten.
LINE TRIMMER APPLICATIONS
Cutting grass and light weeds; edging; and decorative trimming
around trees, fences, etc.
Loading ...
Loading ...
Loading ...