Loading ...
Loading ...
Loading ...
7
Setting up the telescopic thread stand
Extend the telescopic thread stand to its full height, then turn
until it clicks into place.
Place the thread spools or cones over the cone holders on the
spool pin.
If the machine is already threaded, straighten the threads to
prevent tangling.
Opening and closing front cover
Open the front cover
First push the cover to the right as far as it will go and then pull
it downward toward you.
Close the front cover
First pull the cover upward and then slide it to the left until it
locks.
Note: The front cover has a safety switch and the machine will
not sew if the front cover is open.
Removing and replacing the at bed
extension
Free arm sewing
Forafreearmmachine,slideofftheatbedextension.The
free arm makes it easier to sew small items and hard to reach
areas such as armholes and overcasting trouser cuffs.
To remove the at bed extension
Slidetheatbedextensiontotheleftandremoveitfromthe
machine.
To replace the at bed extension
Aligntheprojectionontheatbedextensionwiththegroove
on the back of the free arm and slide it to the right until it snaps
into place.
This manual downloaded from http://www.manualowl.com
Loading ...
Loading ...
Loading ...