Loading ...
Loading ...
Loading ...
11
1
3
4
5
6
7
8
8
2
Threading the upper looper (purple)
1. Pass the thread from back to front through the thread guide
onthethreadstand(1).
2. Pull the thread from left to right under the thread guide at
thebackonthetopcover(2).Usethetweezerstomakethe
threading easier.
3. While holding the thread with both hands, pass it between
the tension discs and pull it down to make certain it is
properlyplacedbetweenthetensiondiscs(3).
4. Thread the looper area of the machine following the purple
colorcodedthreadguides(4-7).Usethetweezerstomake
the threading easier.
5. Use the tweezers to bring the thread behind the lower looper
and thread into the hole in the upper looper from front to
back(8).
6. Pullabout10cmofthreadthroughthelooperanditplace
to the back of the stitch plate.
This manual downloaded from http://www.manualowl.com
Loading ...
Loading ...
Loading ...